3 Light Pendant - Cone

This brass 3 Light Pendant with cone shades is subtle and simple while still commanding attention in any room. Choose between eight different shade finishes and either Antique Bronze or Matt Black fixtures. This pendant would be right at home in both a contemporary or traditional setting. Use as accent lighting above dining tables, kitchen islands or above seating in a winery cellar door or a steakhouse. Available only at Fat Shack Vintage!

Features:

• Quality brass multi light pendant fixture
  
• Shades available in eight finishes and two sizes
  
• Fixtures available in two finishes
• Vintage inspired design
  
  

About the 3 Light Pendant - Cone:

• Quality brass fixtures available in Matt Black or Antique Bronze finish.
• The pole that connects to the ceiling rose is 800mm high but can be shortened by cutting it to a shorter length.
  
• They have a maximum drop off the ceiling to the bottom of the lamp holders of 940mm.  Available in longer lengths by request, please contact us.
• The measurements between the lamp holders centres is 460mm with an overall width of 920mm wide from the outer lamp holder centres.
• The 3 light pendant attaches to the ceiling via a hook hanger which is secured in the ceiling and then the ceiling cap covers the hole. This ceiling cap is 110mm in diameter and 60mm high.
• The small shade is: 9.5cm high x 25cm wide in diameter across the open face. 
• The large shade is: 155mm high x 350mm wide in diameter across the open face. 
• The Black, White and Federation Green steel shades are a painted finish with a white inner.
• The brass shades are made from solid brass.
• The copper shades are made from solid copper.
• The Aged Solid Brass/Copper shades have been fired for a deeper aged look. The Bright Solid Brass/Copper shades have been mildly buffed on the outside to give them a brighter finish and then left raw. The inside is cleaned (not buffed) and then left raw. The shades are then oil rubbed to preserve the look for longer. Both finishes will continue to patina over time dependant on the environmental conditions they are placed in. The bright brass and bright copper shades will patina at a slower rate because of the oil-rubbed finish.
• Our brass and copper shades are made with 100% natural materials. The finishes are not designed to be a uniform, consistent finish. A consistent finish can only be achieved through electroplating over cheaper materials. The beauty of choosing natural materials are the characteristics of the imperfections and patina which continue to develop over time. The imperfections are not considered defects.
• The Vintage Steel shades are made from quality steel. The steel is left raw and then oil-rubbed to give it a matt finish and minimise the oxidisation/ rusting/ spotting. This preserves the raw vintage steel look. It will continue to patina though dependant on the environmental conditions it is placed in. The shades may display minor spot rusting from the method of finish. This is in line with the intended style and is not considered a defect.
• Pendant fixture available in 5 other finishes. Please contact us to arrange. 
• The lamp holder takes a standard bayonet (B22) light bulb (max 60W).
• Please note: As this light is made to order, there is a longer lead time. See our 'delivery & returns' tab for more detail. If your order is urgent, please contact us for the current stock on hand level. Due to the size of the item, the postage cost will need to be confirmed. 

Please Note: this listing is for the 3 Light Pendant - Cone only. The light bulbs shown in the pictures are for illustration purposes only. 

This pendant light takes a standard household bayonet (B22) light bulb. Max 60W. We recommend from our range our Quad Loop Round 4W LED Bulb for a soft warm light or the 6W Filament 2600K Teardrop LED for a brighter look.

Fat Shack Vintage delivers Australia wide. From the tip to the tail and all the places in-between… if you live in Australia, we’ll get it to you! 

• As this product is made to order here in Australia, there is a longer lead time. This ensures the highest standards of craftsmanship and attention to detail. Current lead time to produce is approximately 10 weeks from order date. The lead time is approximate. If your order is urgent, please contact us for the current stock on hand level. Please note: orders containing ‘made to order’ items, will be held and shipped in their entirety once all goods are available. If you wish to split your order into separate shipments, a further freight charge will apply. Please contact us for freight calculations.
• Please note that we cannot cancel made to order items for a refund or exchange once production has commenced.
• For a shipping quote, please contact us prior to ordering. Due to the size of the product item, the postage cost will need to be confirmed before you add the product to your cart and proceed to checkout. Please contact us to calculate the shipping price for you.
• To ensure peace of mind, all FSV orders are sent with tracking and full insurance.

Typical delivery times after dispatch are:

• Melbourne: approximately 2 business days 
• Sydney, Canberra, Adelaide: approximately 3-4 business days
• Brisbane, Tasmania: approximately 4-5 business days
• Darwin, Perth: approximately 5-6 business days
• For all areas outside these metro locations please allow an additional 1-3 business days (except if in NT remote areas, add on additional 10 business days)
• For large / bulky orders or express shipping, please contact us directly for a quotation of postage costs.

Click & Collect

Pickups and inspections are available at our Melbourne showroom / warehouse. Please contact us to arrange. 

Returns

We provide a 30 day return policy on all items purchased from our website (this excludes sale stock and custom orders). If the item arrives in tip top condition but you decide that you just don’t like it anymore or have changed your mind then please return the items in original, unused, unmarked condition and packaging within 30 days for a refund less freight.

Please note: This excludes sale items and custom orders. For ‘special event’ sale items please see the terms and conditions applicable to that sale.

Please contact us so we know to expect it and return the items to the following address:
Fat Shack Vintage
2 Age Street
Cheltenham, VIC 3192

Please check your order upon delivery and if required, report any damages, faults or problems within 14 days of receipt of goods. We will of course replace / refund any damaged items at no additional cost to you. 

For more info please see our FAQs or Returns & Warranties Page