Factory Batten Light

or with 4 payments of AUD $27.50 with Learn more
  • PLEASE NOTE THE VINTAGE STEEL SHADE IS CURRENTLY OUT OF STOCK UNTIL APPROXIMATELY LATE SEPTEMBER & THE BRIGHT BRASS & COPPER SHADES ARE CURRENTLY OUT OF STOCK UNTIL MID OCTOBER. ALL ORDERS WILL BE HELD AND SENT IN THEIR ENTIRETY AFTER ARRIVAL OF STOCK.

    The Factory Batten Light is a great lighting solution for any room with limited hanging space. Choose between six classic shade finishes; black enamel steel, brass, bright brass, copper, bright copper and vintage steel. These quality shades are styled off old factory warehouse lighting but with an added twist of character. Ideal for home, cafe or restaurant lighting, these flush mounts will suit any decor from rustic to vintage modern.  

    Features:

    • Factory warehouse styled ceiling light
    • Available in six finishes
    • Optional shade covers for a customised look
    • Ideal for modern to traditional decor interiors
    • Takes a standard B22 light bulb

    About the Factory Batten Light: 

    • The black metal ceiling rose is 100mm in diameter and 50mm in height and has a brass lampholder which is 44mm high off the ceiling rose.
    • The batten holder allows shades to be fitted as close to the ceiling as possible.
    • The total drop from the ceiling to the bottom of the shade is either 250mm including the wooden block or 230mm without the wooden block.
    • The shade diameter is 350mm across the opening.
    • The shades are available in six finishes black, aged brass, bright brass, aged copper, bright copper and vintage steel
    • The black enamel shade is made from quality steel with a black enamel outer and contrasting white inner
    • The Aged Brass and Bright Brass shades are made from 100% solid brass.
    • The Aged Copper and Bright Copper shades are made from 100% solid copper.
    • The aged brass and aged copper shades have been fired for a deeper aged look. The bright brass and bright copper shades have been mildly buffed on the outside to give them a brighter finish and then left raw. The inside is cleaned (not buffed) and then left raw. The shades are then oil rubbed to preserve the look for longer. Both finishes will continue to patina over time dependant on the environmental conditions they are placed in. The bright brass and bright copper shades will patina at a slower rate because of the oil-rubbed finish.
    • Our brass and copper shades are made with 100% natural materials. The finishes are not designed to be a uniform, perfectly consistent finish. A perfect, unnaturally consistent finish can only be achieved by using cheaper iron shades with an electroplating finish. The beauty of choosing to use expensive, natural materials are the characteristics of the imperfections and patina which continue to develop over time. The imperfections are not considered defects.
    • The Vintage Steel shades are made from quality steel. The steel is left raw and then oil-rubbed to give it a matt finish and minimise the oxidisation/rusting/spotting. This preserves the raw vintage steel look. It will continue to patina though dependant on the environmental conditions it is placed in. The shades may display minor spot rusting from the method of finish. This is in line with the intended Vintage Steel style.
    • Our finishes are all done by hand from natural materials. They are intended to be rustic finishes from raw materials. Every shade has unique characteristics of imperfections to the finish. This is the nature of the natural materials and the finishes we have chosen.
    • Optional shade covers include metal cage guard in matt black (80mm), curved eye glass cover in frosted or clear and a flat frosted glass cover (60mm), lugnut with frosted glass (cover 30mm, nut 50mm).
    • The shade covers are slumped glass. Bubbles, lines, slight surface defects or discolourations are characteristics of all slumped glass. They are not considered flaws or defects.
    • The wooden mounting block pictured can be purchased separately here. Select the 10cm version from the drop down menu for this fitting.
    • The lampholder takes a standard bayonet (B22) bulb. Max 40W.

  • SKU

    C027, C039

    Width/Diameter (mm)

    350mm

    Height (mm)

    230mm (300mm with Cage Guard, 260mm with Glass Cover)

    Wall Mount Plate (diameter)

    100mm x 50mm

    Material

    Brass, Steel, Pure Copper

    Finish

    Black Enamel, Brass, Bright Brass, Copper, Bright Copper and Vintage Steel

    Bulb Included

    No

    Bulb Base

    B22

    Bulb Quantity required

    1
  • Please Note: this listing is for the Factory Batten Light only. The wooden mounting block and light bulbs shown in the pictures are sold separately. 

    This fitting requires one standard bayonet B22 bulb, max 40W. Complete the look with our designer light bulbs such as our vintage style exposed Large Round Squirrel Cage Filament Bulb or our LED Filament Bulb 6W to add that finishing touch.

  • Fat Shack Vintage proudly delivers Australia wide. From the tip to the tail and all the places in-between – if you live in Australia, we’ll get it to you!

    • For a shipping quote, simply add the product to your cart and proceed to checkout, where you can enter your postcode in the shipping rate calculator. We’ll calculate the shipping price for you, and this price will be displayed as part of the order total.
    • To ensure peace of mind, all FSV orders are sent with tracking and full insurance.
    • In-stock items are normally dispatched from our Melbourne warehouse within 2 business days from the date of purchase. If the order is urgent, please call us to confirm stock availability.


    Typical delivery times after the date of dispatch are:

    • Melbourne: 2 business days
    • Sydney, Canberra & Adelaide: 3-4 business days
    • Brisbane & Tasmania: 4-5 business days
    • Darwin & Perth: 5-6 business days
    • For all non-metro locations, please allow an additional 1-3 business days. However, if you’re in in a remote NT area, please allow an additional 10 business days. The wait will be worth it, we promise!
      If your order is big and bulky, or requires express shipping, please contact us before ordering so that we can create a tailored postage quote just for you.

    Click & Collect

    You can now click & collect your order from our Melbourne showroom, so shopping with us has never been easier. Please contact us to arrange a collection time convenient for you.

    Returns

    We understand that, from time-to-time, not everything goes according to plan. For this reason, we happily offer a 30-day return policy on all items purchased from our website. If your item arrives in tip top condition, but you’re not 100% satisfied, you can return the items in original, unused and unmarked condition with original packaging within 30 days for a full refund, minus the freight cost.

    Please note: This excludes sale items and custom orders. For ‘special event’ sale items please see the terms and conditions applicable to that sale.

    In order to process your refund request, please contact us that we can know when to expect the products back, and please return the items to the following address:

    Fat Shack Vintage
    2 Age St
    Cheltenham VIC 3192

    Upon delivery of your order, please check your order to ensure it’s arrived in perfect condition. If there are any damages, faults or problems with your order, please contact us within 14 days of receipt of goods. We will of course replace or refund any damaged items at no additional cost to you.

    For more info please see our FAQs or our Returns & Warranties Page

description

PLEASE NOTE THE VINTAGE STEEL SHADE IS CURRENTLY OUT OF STOCK UNTIL APPROXIMATELY LATE SEPTEMBER & THE BRIGHT BRASS & COPPER SHADES ARE CURRENTLY OUT OF STOCK UNTIL MID OCTOBER. ALL ORDERS WILL BE HELD AND SENT IN THEIR ENTIRETY AFTER ARRIVAL OF STOCK.

The Factory Batten Light is a great lighting solution for any room with limited hanging space. Choose between six classic shade finishes; black enamel steel, brass, bright brass, copper, bright copper and vintage steel. These quality shades are styled off old factory warehouse lighting but with an added twist of character. Ideal for home, cafe or restaurant lighting, these flush mounts will suit any decor from rustic to vintage modern.  

Features:

  • Factory warehouse styled ceiling light
  • Available in six finishes
  • Optional shade covers for a customised look
  • Ideal for modern to traditional decor interiors
  • Takes a standard B22 light bulb

About the Factory Batten Light: 

  • The black metal ceiling rose is 100mm in diameter and 50mm in height and has a brass lampholder which is 44mm high off the ceiling rose.
  • The batten holder allows shades to be fitted as close to the ceiling as possible.
  • The total drop from the ceiling to the bottom of the shade is either 250mm including the wooden block or 230mm without the wooden block.
  • The shade diameter is 350mm across the opening.
  • The shades are available in six finishes black, aged brass, bright brass, aged copper, bright copper and vintage steel
  • The black enamel shade is made from quality steel with a black enamel outer and contrasting white inner
  • The Aged Brass and Bright Brass shades are made from 100% solid brass.
  • The Aged Copper and Bright Copper shades are made from 100% solid copper.
  • The aged brass and aged copper shades have been fired for a deeper aged look. The bright brass and bright copper shades have been mildly buffed on the outside to give them a brighter finish and then left raw. The inside is cleaned (not buffed) and then left raw. The shades are then oil rubbed to preserve the look for longer. Both finishes will continue to patina over time dependant on the environmental conditions they are placed in. The bright brass and bright copper shades will patina at a slower rate because of the oil-rubbed finish.
  • Our brass and copper shades are made with 100% natural materials. The finishes are not designed to be a uniform, perfectly consistent finish. A perfect, unnaturally consistent finish can only be achieved by using cheaper iron shades with an electroplating finish. The beauty of choosing to use expensive, natural materials are the characteristics of the imperfections and patina which continue to develop over time. The imperfections are not considered defects.
  • The Vintage Steel shades are made from quality steel. The steel is left raw and then oil-rubbed to give it a matt finish and minimise the oxidisation/rusting/spotting. This preserves the raw vintage steel look. It will continue to patina though dependant on the environmental conditions it is placed in. The shades may display minor spot rusting from the method of finish. This is in line with the intended Vintage Steel style.
  • Our finishes are all done by hand from natural materials. They are intended to be rustic finishes from raw materials. Every shade has unique characteristics of imperfections to the finish. This is the nature of the natural materials and the finishes we have chosen.
  • Optional shade covers include metal cage guard in matt black (80mm), curved eye glass cover in frosted or clear and a flat frosted glass cover (60mm), lugnut with frosted glass (cover 30mm, nut 50mm).
  • The shade covers are slumped glass. Bubbles, lines, slight surface defects or discolourations are characteristics of all slumped glass. They are not considered flaws or defects.
  • The wooden mounting block pictured can be purchased separately here. Select the 10cm version from the drop down menu for this fitting.
  • The lampholder takes a standard bayonet (B22) bulb. Max 40W.

SPECIFICATIONS

SKU

C027, C039

Width/Diameter (mm)

350mm

Height (mm)

230mm (300mm with Cage Guard, 260mm with Glass Cover)

Wall Mount Plate (diameter)

100mm x 50mm

Material

Brass, Steel, Pure Copper

Finish

Black Enamel, Brass, Bright Brass, Copper, Bright Copper and Vintage Steel

Bulb Included

No

Bulb Base

B22

Bulb Quantity required

1
Recommended Bulbs

Please Note: this listing is for the Factory Batten Light only. The wooden mounting block and light bulbs shown in the pictures are sold separately. 

This fitting requires one standard bayonet B22 bulb, max 40W. Complete the look with our designer light bulbs such as our vintage style exposed Large Round Squirrel Cage Filament Bulb or our LED Filament Bulb 6W to add that finishing touch.

Delivery & Returns

Fat Shack Vintage proudly delivers Australia wide. From the tip to the tail and all the places in-between – if you live in Australia, we’ll get it to you!

  • For a shipping quote, simply add the product to your cart and proceed to checkout, where you can enter your postcode in the shipping rate calculator. We’ll calculate the shipping price for you, and this price will be displayed as part of the order total.
  • To ensure peace of mind, all FSV orders are sent with tracking and full insurance.
  • In-stock items are normally dispatched from our Melbourne warehouse within 2 business days from the date of purchase. If the order is urgent, please call us to confirm stock availability.


Typical delivery times after the date of dispatch are:

  • Melbourne: 2 business days
  • Sydney, Canberra & Adelaide: 3-4 business days
  • Brisbane & Tasmania: 4-5 business days
  • Darwin & Perth: 5-6 business days
  • For all non-metro locations, please allow an additional 1-3 business days. However, if you’re in in a remote NT area, please allow an additional 10 business days. The wait will be worth it, we promise!
    If your order is big and bulky, or requires express shipping, please contact us before ordering so that we can create a tailored postage quote just for you.

Click & Collect

You can now click & collect your order from our Melbourne showroom, so shopping with us has never been easier. Please contact us to arrange a collection time convenient for you.

Returns

We understand that, from time-to-time, not everything goes according to plan. For this reason, we happily offer a 30-day return policy on all items purchased from our website. If your item arrives in tip top condition, but you’re not 100% satisfied, you can return the items in original, unused and unmarked condition with original packaging within 30 days for a full refund, minus the freight cost.

Please note: This excludes sale items and custom orders. For ‘special event’ sale items please see the terms and conditions applicable to that sale.

In order to process your refund request, please contact us that we can know when to expect the products back, and please return the items to the following address:

Fat Shack Vintage
2 Age St
Cheltenham VIC 3192

Upon delivery of your order, please check your order to ensure it’s arrived in perfect condition. If there are any damages, faults or problems with your order, please contact us within 14 days of receipt of goods. We will of course replace or refund any damaged items at no additional cost to you.

For more info please see our FAQs or our Returns & Warranties Page

Print Page Icon Print Specification